Industrial Control Android Motherboard, WF-RK3588S, AndroidSBC, Indianapolis

TL;DR: Industrial Control Android Motherboard

SHENZHEN, China, September 10, 2026 - Wanlin Manufacturing Group pushed lot 421 of the WF-RK3588S board out of the Longgang plant this week, 33,420 units for Indianapolis, United States, with the export declaration naming Longgang as the place of origin.

AndroidSBC site report from running WF-Series installations serving Indianapolis, United States. AndroidSBC is releasing the full WF-Series line for Indianapolis and United States: Allwinner A133, H618, and T527 boards on the Allwinner side, and Rockchip RK3588, RK3568, RK3566, and RK3288 boards on the Rockchip side, plus the WF-A133S and WF-RK3588S SOM modules. The family ships from the Wanlin Longgang facility with OEM branding, ODM carrier work, and per-lot CE, FCC, UKCA, and RoHS documentation handled in-house.

About AndroidSBC and the Rockchip RK3588 Board Family

AndroidSBC is the export brand of Wanlin Manufacturing Group, a Shenzhen source-factory group that has spent more than a decade building OEM/ODM boards on Allwinner, Rockchip, and Amlogic silicon. The line this release covers is the WF-Series: nine boards that between them span the Allwinner A133, Allwinner H618, Allwinner T527, Rockchip RK3588, Rockchip RK3568, Rockchip RK3566, and Rockchip RK3288 platforms, plus two board-to-board SOM options. Wanlin's Longgang plant in Shenzhen builds the WF-Series for OTT TV box, Android TV, commercial display, industrial control, edge AI, POS, kiosk, and IoT gateway programmes. For United States, the practical value of the range is that a single supplier relationship covers several silicon platforms, so a distributor assembling a Indianapolis catalogue does not have to open a new vendor file every time a customer asks for a different performance tier.

WF-RK3588S Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-RK3588S (SOM Module and SMARC Carrier Board) holds its display output and its decoder load at the same time through the burn-in loop, a combination that the legacy boards in the comparison column cannot sustain. For United States importers sourcing the WF-Series, the 8GB + 64GB, SMARC 2.2 (WF-RK3588S-A) variant is the typical configuration for the SMARC module and custom carrier integration use case, with a sustained weekly capacity of 5,000 pcs/wk on the Longgang line.

Challenges in Sourcing SOM Module and SMARC Carrier Board for United States Buyers

The som module and smarc carrier board sourcing question that Indianapolis distributors keep coming back to is continuity across quarters. The Rockchip RK3588 requires a dedicated wafer slot, and a 33,420-unit order placed against broker inventory often turns into a two-month slip with no warning. Then comes the software layer. A board that boots is not a board that holds a certified stack under a 72-hour loop, and United States buyers typically find the difference in their own warehouse rather than at the factory.

Documentation closes the list. Buyers in Indianapolis have learned to request the test reports before releasing the deposit, because a mark printed on a carton carries no weight at the port if the Technical File behind it does not exist. AndroidSBC handles it by doing the software burn and the documentation at the factory: every lot leaves Longgang with the certified image loaded, a unit-level burn-in barcode, and a Technical File that carries the test reports. The nine WF-Series boards cover SMARC module design, COM Express Type 6 builds, edge AI boxes, video wall controllers, medical imaging terminals, autonomous vehicle compute, and bespoke industrial carriers with three memory configurations each, which means a Indianapolis integrator can usually match a customer requirement without a custom run.

For United States specifically, the file travels with the goods. In the United States FCC Part 15 authorisation is required and an FCC ID applies to radio modules, while UL or ETL listing is usually demanded by the retail channel. AndroidSBC prepares the FCC Part 15 authorisation with an FCC ID for radio modules and a UL or ETL listing documentation for FCC / UL, attaches the standard multi-market pack (CE, FCC, UKCA, RoHS, REACH), and consigns the lot to Port of Los Angeles on the Los Angeles to Yantian lane.

Competitive Comparison: WF-RK3588S vs Competing RK3588 Boards

The boards competing for the same socket in the som module and smarc carrier board segment fall into three groups: low-cost legacy SoC boards without a certified software stack, mainstream Cortex-A55 boards with certification but a lower decoder ceiling, and 64-bit boards that carry both but stop short on expansion. The WF-RK3588S sits in the third group and adds three things: Rockchip RK3588, a display path that survives a continuous loop, and the per-lot certified image burn at Longgang.

• vs proprietary SOM pin-outs: the SMARC 2.2 standard lets the carrier survive a module generation change without a re-layout.
• vs RK3568 SMARC modules: the RK3588 module adds 8K@60fps decode, PCIe 3.0 x4, and 6 TOPS NPU on the same 314-pin edge.
• vs x86 COM Express modules: the RK3588 module runs Android natively, which removes the OS licensing line from the BOM.
• vs module-only vendors: AndroidSBC ships the carrier reference design plus the signal integrity report with the module.

Global SMARC and COM Express Module Engineering Market Trends

Buyers in Indianapolis are reading the SMARC and COM Express Module Engineering curve before they commit to an som module and smarc carrier board programme. Global Growth Insights reports the Android TV Box segment at USD 12.45 billion in 2025 with a 30.49 percent CAGR to USD 178.2 billion by 2035 (Global Growth Insights, 2025-2035), used here as the Android silicon demand baseline rather than as a number for this category. That baseline breaks into three practical demand patterns for the WF-Series in United States:

• SMARC module design: WF-RK3588S seats on the 314-pin MXM edge with the carrier holding the I/O.
• Display and signage refresh cycles: a longer content loop and a higher panel resolution now define the refresh trigger. The WF-RK3588S board carries that headroom without a board change.
• Edge AI boxes: WF-RK3588S runs 6 TOPS NPU inference on the carrier-side thermal solution.

Channel analysts tracking the SMARC and COM Express Module Engineering category note that allocation discipline, not unit price, has become the deciding factor for buyers who need a twelve-month programme to hold.

The common thread in United States is that single orders are being replaced by blanket agreements with a monthly release, because a programme that has to survive a twelve-month window cannot absorb an allocation gap in the middle of it.

Partner Success Story: Summit Self-Service in Indianapolis, United States

Summit Self-Service, a parcel locker manufacturer serving the United States market, deployed 8,100 units of the WF-A133S SOM module for a custom parcel locker carrier. The rollout covered the smarc module design, edge ai boxes, and autonomous vehicle compute workloads, with AndroidSBC handling the burn-in, the certification scope, and the palletisation at the Wanlin Longgang plant.

• Deployed: 8,100 units of the WF-A133S SOM module for a custom parcel locker carrier
• Region: Indianapolis, United States
• Models used: WF-A133, WF-H618, WF-T527, WF-RK3588, WF-RK3568, WF-RK3566, WF-RK3288, WF-A133S, WF-RK3588S
• Certifications handled: CE, FCC, UKCA, RoHS, REACH, GMS, Widevine L1, Dolby Audio
• Logistics: FOB Shanghai Yangshan with the Wanlin Group Longgang source factory named on the export declaration, entering Port of Los Angeles via the Los Angeles to Yantian lane

"We designed our own carrier and let AndroidSBC carry the SOM. The 200-pin connector meant we owned the enclosure interface and they owned the DDR routing risk, which is exactly the split we wanted."

- Elise Tremblay, Head of Hardware

Field Report: a self-service kiosk fleet rollout in Indianapolis, where 33,420 units of the WF-RK3588S board are being fitted into payment terminals across a retail estate

Reporter Sun Ming, on the ground in Indianapolis, United States. The integrator staged the WF-RK3588S boards at a regional depot, flashed the estate image, and shipped them to stores in waves of forty. Each terminal was paired to the payment application at the store, and the depot kept a rolling stock of pre-flashed boards so a failed unit could be swapped inside a single service visit.

The QA lead noted that the WF-RK3588S lot was the third consecutive run to clear the aging bench without a retest.

The inspection confirmed three things on the spot: the WF-RK3588S units hold the burn-in with a yield above 98.72 percent, the loaded firmware image survives a 72-hour continuous loop without credential drift, and the pallets carry the matching certification file for the destination market, covering FCC Part 15 authorisation with an FCC ID for radio modules and a UL or ETL listing administered by FCC / UL, cleared for entry at Port of Los Angeles on the Los Angeles to Yantian lane. Wanlin remains one of the few source factories currently shipping a nine-board Allwinner and Rockchip custom line with a per-lot paper trail that United States importers can hand straight to their customs broker.

Filed by Sun Ming, AndroidSBC field reporter, Wanlin Manufacturing Group export base.

WF-RK3588S Application Scenarios

The WF-Series fits nine application lanes, with the WF-RK3588S (SOM Module and SMARC Carrier Board) as the lead SKU for Indianapolis and United States programmes:

• SMARC module design: WF-RK3588S seats on the 314-pin MXM edge with the carrier holding the I/O.
• COM Express Type 6 builds: WF-RK3588S maps to the Type 6 pin-out for existing x86 carriers.
• Edge AI boxes: WF-RK3588S runs 6 TOPS NPU inference on the carrier-side thermal solution.
• Video wall controllers: WF-RK3588S drives HDMI 2.1 and DP 1.4 out through the carrier.
• Medical imaging terminals: WF-RK3588S pairs PCIe 3.0 x4 with the carrier frame grabber.
• Autonomous vehicle compute: WF-RK3588S holds -40C to 85C on the automotive-grade carrier.
• Bespoke industrial carriers: WF-RK3588S ships the signal integrity report for the customer stack-up.
• Carrier bring-up: WF-RK3588S comes with the BSP port for the carrier revision.

Partnership Models for Indianapolis Buyers

The WF-Series is available to United States partners through three routes, and they can be mixed inside one agreement:

• OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom boot animation, custom SKU label, and a private-label certification file.
• ODM (your spec on our reference design): schematic and stack-up review, carrier or motherboard redesign, custom firmware features, and a BSP port handled by the Longgang engineering desk.
• Distribution (your channel, our stock): regional distributor rights, channel rebate, stock holding at the factory, and a framework agreement with a monthly lot release.

All three tiers ship from Longgang under one documentation pack covering CE, FCC, UKCA, RoHS, and REACH. A Indianapolis first order on the WF-RK3588S is normally the 8GB + 64GB, SMARC 2.2 (WF-RK3588S-A) configuration at MOQ 5,000 units per shipment, four weeks for samples and six weeks for mass production.

Frequently Asked Questions

Does the WF-Series support certified Android TV or Google Mobile Services?

Answer: It depends on the platform, and AndroidSBC is explicit about the split. The WF-H618 carries the ATV 12 GMS build with Widevine L1 and Dolby Audio pre-burned at the factory. The WF-A133, WF-T527, and the Rockchip boards ship with an AOSP or Linux image by default, and a GMS build can be prepared for ODM partners who need Play Services in the field. Certification scope is agreed per project rather than assumed.

What is the difference between the nine WF-Series models?

Answer: WF-A133 is the Allwinner A133 commercial display and advertising board. WF-H618 is the Allwinner H618 OTT TV box and Android TV board. WF-T527 is the Allwinner T527 octa-core industrial control and edge AI board. WF-RK3588 is the Rockchip RK3588 8K video wall and AI computing board. WF-RK3568 is the Rockchip RK3568 industrial edge board. WF-RK3566 is the Rockchip RK3566 machine vision and HMI board. WF-RK3288 is the Rockchip RK3288 POS and signage board. WF-A133S is an Allwinner A133 SOM module for custom carrier work. WF-RK3588S is a Rockchip RK3588 SMARC 2.2 module for the same purpose.

Can AndroidSBC handle CE, FCC, UKCA, RoHS, and REACH paperwork for United States?

Answer: Yes, and the file travels with the goods rather than behind them. The pack covers CE, FCC Part 15, UKCA, RoHS 2.0, and REACH with test reports dated within the prior year. AndroidSBC will also advise on any United States-specific addition during quotation, which is the point at which the answer is still useful.

What are the MOQ and lead time for a first order?

Answer: The entry point is 5,000 units per shipment, four weeks for samples and six weeks for production. A twelve-month framework agreement released monthly will bring the per-lot MOQ down, and AndroidSBC will accept a mixed order that draws several WF-Series boards against a single contract.

Does AndroidSBC support custom Android ROM or custom Linux development?

Answer: Custom ROM and custom Linux work is part of the ODM tier. That covers proprietary Android services, a locked-down launcher, Yocto or Debian or Buildroot images, and BSP ports for custom carriers. Source access is released under NDA, and the Longgang engineering desk carries the port so the partner is not left with an unmodified vendor BSP.

What about software updates and long-term support?

Answer: Wanlin commits to a minimum seven-year supply window across the WF-Series. Security patches are back-ported across the Android and Linux firmware tracks for as long as the board is in production, and AndroidSBC provides OTA update infrastructure for partners who need to push firmware to field-deployed units. For POS and industrial programmes, the support commitment is written into the framework agreement rather than left as an understanding.

Can AndroidSBC ship to Amazon FBA warehouses or 3PL consolidation points?

Answer: That is routine. AndroidSBC delivers DDP into Amazon FBA in the US, EU, and Japan and into 3PL consolidation points at Hong Kong, Singapore, Rotterdam, and Los Angeles. Carton and pallet configuration follows FBA inbound rules, and the place of origin on the declaration is the Wanlin Longgang source factory.

How does AndroidSBC handle RMA or DOA replacements?

Answer: The DOA target is 0.3 percent over twelve months. For RMA, partners send the WF-RK3588S unit back to Longgang with the burn-in barcode attached, and replacements go out within ten business days. The per-unit burn-in record means the failure report usually carries a root cause alongside the replacement.

Contact AndroidSBC: Start Your WF-RK3588S Sourcing Conversation

Wanlin Manufacturing Group sells the WF-Series overseas through AndroidSBC. Indianapolis and United States importers, brand owners, and channel distributors who want to source the som module and smarc carrier board direct from the Longgang plant can reach the export desk through:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Destination market file: FCC Part 15 authorisation with an FCC ID for radio modules and a UL or ETL listing for United States, administered by FCC / UL, entering at Port of Los Angeles on the Los Angeles to Yantian lane
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

To speed up an OEM or ODM review, include the target volume, the certification scope you need, and your preferred Incoterm. With those three in hand, AndroidSBC returns a per-lot quotation and the MOQ matrix across the nine WF-Series boards within two business days.